Maximizing the Lifespan of Your Car with Ceramic Coating: Madison, WI Tips

Don't Go DIY 

Car owners can apply ceramic coatings on their cars themselves. They may feel tempted to do so because a DIY job seems faster and cheaper. But DIY endeavors can quickly become more expensive and inconvenient. 

Only an experienced professional car detailer knows about all the possible mistakes and how to avoid them. Most car owners are amateurs and will make a lot of mistakes. They likely can't master the smooth, consistent application ceramic coating needs on their first try. 

When car owners make these mistakes, they will have to wet sand the ceramic coating off. They then need to buy another kit, reapply the coating, and make more mistakes. As you can probably understand, the process can quickly become an expensive vicious cycle. 

Reason for the Cost 

Yes, getting a professional to coat your vehicle can be costly. Adding a ceramic coating to larger vehicles can cost over a thousand dollars.

The cost isn't just about the experience level of the professional. They also have to buff out all of the imperfections in the car's paint job. All this work can take considerable time and effort. 

Beautiful Gloss

A ceramic coating adds a beautiful gloss to the top of your car's paint. It will also add depth to your car's paint and bring out the best in the original paint job. 

UV Ray Protection

UV rays are beams of radiation that come from the sun. These can cause your car's paint job to oxidize and fade. So if you leave your car outside often, its paint job will start to fade.

You can avoid this if you give your car a ceramic coating. This will protect your car's surface from UV rays and keep it bright and colorful for a significant fraction of the vehicle's lifespan. 

Chemical Stain Protection 

Acidic contaminants in the air can cause damage to your car's paint. These can come from many of the common polluters in urban environments, like factories. 

Luckily, ceramic coatings are resistant to these chemicals. When this coating is over your car, it will prevent them from bonding to your car's paint and causing stains. 

Avoid the Car Wash 

The machines in an automatic car wash can be rough on your ceramic coating. They will decrease the overall lifespan of it. Despite the inconvenience, it's better to hand-wash your car. 

Don't Use Brushes 

A ceramic coating should be easy for you to wipe down. So there's no need for you to use harsh brushes when cleaning a ceramic coating-covered car.

Plus, cleaning your car in this way can also cause scratches and swirls. So you should stick with rags or car mitts, water, and a cleaning solution.

The Right Cleaning Solution

Also, you need to use a cleaning solution that won't wear your ceramic coating away. A pH-neutral (not acidic or basic) soap is best. You should also avoid soaps that have additives like wax. 

Use the Two-Bucket Method 

In the two-bucket washing method, one bucket is filled with a washing solution. The other bucket should contain water. Besides these buckets, you should have your car rags or mitts. 

The first step is to dip your rag or mitt into the washing solution. Then use the wet rag to wash a section of your car. After you do this, dip your tool into the second bucket, clean it off, and rinse the section you just cleaned.